Security Verification
=
CDT日本語復習赤本 & CDT関連復習問題集
BONUS！！！ Tech4Exam CDTダンプの一部を無料でダウンロード：https://drive.google.com/open?id=1NfhVR0d3GaRBjeoUi6XMnil5bjYJ76ay
Tech4Examが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、Construction Specifications InstituteのCDT試験も一年の無料アップデートになっています。
変化する地域に対応するには、問題を解決する効率を改善する必要があります。これは、試験に対処するだけでなく、多くの側面を反映しています。 CDT実践教材は、あなたがそれを実現するのに役立ちます。これらの時間に敏感な試験の受験者にとって、重要なニュースで構成される高効率のCDT実際のテストは、最高の助けになります。定期的にそれらを練習することによってのみ、あなたはあなたに明らかな進歩が起こったのを見るでしょう。
CDT日本語復習赤本の選択、Construction Documents Technologistの合格おめでとう
現在多くの会社では、特別なGAQM、EMC、ISC認証などを持っているなら、高い給料が得られています。我々の提供するCDT問題集はあなたに試験に順調に合格することができます。試験に参加する前に、我々の模擬問題集CDT資料が必要です。この問題集を選択したら、あなたは100％試験に合格することができます。
Construction Specifications Institute Construction Documents Technologist 認定 CDT 試験問題 (Q80-Q85):
質問 # 80
With whom does the responsibility for maintaining record documents at the project site rest?
正解：C
解説：
Comprehensive and Detailed Explanation (CSI-aligned, paraphrased)
CSI guidance and typical Division 01 "Project Record Documents" or "Record Drawing" sections assign the responsibility for maintaining record documents at the project site to the Contractor.
These record documents (often called "as-builts" when finalized) include:
* A set of contract drawings marked up to show actual installed conditions.
* Notations of changes made by Change Orders, Construction Change Directives, and field orders.
* Markups of routing of concealed utilities, changes in locations, and deviations from the original design that were approved during construction.
Key CSI-aligned principles:
* The Contractor is the party actually performing and coordinating the Work, and is in the best position to record day-to-day deviations and field changes.
* Division 01 typically states that the Contractor must:
* Keep a current set of record documents on site, up to date as changes occur.
* Turn over the completed record documents to the A/E and/or Owner at Substantial or Final Completion as part of closeout.
Therefore, responsibility for maintaining the record documents at the project site rests with:
* A. Contractor
Why the other options are not correct:
* B. A/E's consultant - Consultants (e.g., structural, mechanical) prepare and may later review record documentation, but they are not on site continuously and are not responsible for maintaining daily- updated record sets at the site.
* C. A/E's project representative - The A/E's representative may review the record documents or check that they are being maintained, but the contract language typically assigns the duty itself to the Contractor.
* D. Owner's project representative - The Owner's representative monitors the project on the Owner's behalf but does not usually maintain the working record set. That would be duplicative and impractical compared to the Contractor's role.
Key CSI-Related Reference Titles (no links):
* CSI Construction Specifications Practice Guide - Division 01 sections on Project Record Documents / As-Builts.
* CSI Project Delivery Practice Guide - Construction Phase responsibilities of the Contractor and A/E.
* CSI CDT Study Materials - contractor responsibilities for record documents and closeout submittals.
質問 # 81
Which member of the project team initiates the project, assumes the risk, controls and manages the design and construction process, and provides the funding?
正解：B
解説：
CSI's description of project roles is very clear about the owner's role in project delivery:
* The owner is the party that:
* Identifies the need or opportunity and therefore initiates the project.
* Provides the funding for design and construction.
* Retains the design and construction teams and selects the project delivery method.
* Ultimately assumes the primary financial and project risk, because the owner is the one investing in and depending on the completed facility.
In contrast:
* The designer (architect/engineer) is responsible for planning and design, preparing construction documents, and administering the construction contract on the owner's behalf, but does not typically initiate the project or provide funding.
* The contractor is responsible for constructing the project in accordance with the contract documents; the contractor bears construction execution risk, but not the basic project-initiative and funding role.
* Suppliers provide materials/equipment and have no overarching control over the project delivery process.
The question lists all of the characteristics that CSI attributes to the owner:
"initiates the project, assumes the risk, controls and manages the design and construction process, and provides the funding." Thus, the correct answer is Option D - Owner.
CSI references (by name only, no links):
* CSI Project Delivery Practice Guide - "Participants in Project Delivery" (owner, designer, constructor, suppliers)
* CDT Body of Knowledge - descriptions of owner responsibilities and risk
質問 # 82
Who is responsible for accepting and inspecting for damage of the owner-furnished products delivered to the project site?
正解：D
質問 # 83
A drawing set arranged in the following order is an example of what type of drawing organization?
Cover Sheet, Sheet Index, Life Safety, Demolition, Civil, Landscaping, Architectural, Interiors, Structural, Mechanical, Electrical, Plumbing, Fire Protection
正解：A
質問 # 84
When is the owner entitled to stop the work?
正解：B
解説：
CSI exam content aligns closely with the standard general conditions used in the industry (such as AIA A201). Under those conditions, the owner's right to stop the work typically arises when:
* The contractor fails to correct work that is not in accordance with the Contract Documents, or
* The contractor persistently fails to carry out the work in accordance with the Contract Documents.
In that situation, after appropriate notice, the owner may order the contractor to stop the work until the cause for such order has been eliminated. This is intended to protect the owner from continued defective or nonconforming work and to force corrective action. That is exactly what Option B describes.
Why the other options are incorrect or incomplete:
* A. If the architect/engineer fails to represent owner properlyProblems in the A/E's services are handled through the owner-A/E agreement, not by stopping the contractor's work under the construction contract. There is no standard right for the owner to stop construction solely because of a dispute with the A/E.
* C. If the contractor is presumed to be bankruptBankruptcy or insolvency is typically addressed under termination or suspension provisions, not strictly the owner's immediate "stop work" right described in general conditions. A presumption of bankruptcy alone does not automatically trigger the standard "stop work" clause.
* D. If there is a safety problem on the siteThe contractor is usually designated as the party primarily responsible for site safety and for stopping unsafe operations. The owner may insist that unsafe conditions be corrected, and might in practice insist work stop, but the formal "owner's right to stop the work" clause in general conditions is tied to nonconforming work or failure to follow the Contract Documents, not generally to safety administration (which is the contractor's duty).
Therefore, in the context of CSI-aligned general conditions, the correct answer is B: when the contractor fails to correct work that is not compliant with the contract documents.
Key CSI Reference Titles (no links):
* CSI Project Delivery Practice Guide - Contract Administration and Owner's Rights during Construction.
* CSI Construction Specifications Practice Guide - discussion of General Conditions and owner
/contractor responsibilities.
* CSI CDT Body of Knowledge - "General Conditions: Rights and Responsibilities of the Parties."
質問 # 85
......
Tech4Exam Construction Specifications InstituteのCDT試験問題集は完全な無制限のダンプが含まれていますから、Tech4Examを利用したら気楽に試験に受かることができます。製品検定合格の証明書あるいは他の人気がある身分検定によって、Tech4Exam Construction Specifications InstituteのCDT試験トレーニング資料の長所を完璧に見せることができます。依頼だけでなく、指導のことも最高です。Tech4Exam Construction Specifications InstituteのCDT試験トレーニング資料に含まれている問題と解答を利用して、Construction Specifications InstituteのCDT認定試験に合格することができます。
CDT関連復習問題集: https://www.tech4exam.com/CDT-pass-shiken.html
Construction Specifications Institute CDT日本語復習赤本 しかし、認定を取れるのは候補者にとって簡単なことではありません、これなので、IT技術職員としてのあなたはTech4ExamのConstruction Specifications Institute CDT問題集デモを参考し、試験の準備に速く行動しましょう、Construction Specifications Institute CDT日本語復習赤本 それはより良く自分自身を向上させることができますから、学習するCDT学習ガイドの最適なバージョンを選択できます、CDTラーニングガイドを使用すると、CDT試験に問題なく合格できます、CDT学習教材の包括的な理解を得るために、CDT試験問題のデモを無料でダウンロードする場合は、まず製品の紹介をご覧ください、Construction Specifications Institute製品を購入したら、すぐにCDT学習資料をダウンロードできます。
誰かにこのことを話したりしない、全然、全然まだまだ潤井が好きなままだ、しかし、認定を取れるのは候補者にとって簡単なことではありません、これなので、IT技術職員としてのあなたはTech4ExamのConstruction Specifications Institute CDT問題集デモを参考し、試験の準備に速く行動しましょう。
CDT 試験3回目にして合格した僕がおすすめする参考書はこれ Tech4Exam
それはより良く自分自身を向上させることができますから、学習するCDT学習ガイドの最適なバージョンを選択できます、CDTラーニングガイドを使用すると、CDT試験に問題なく合格できます。
P.S. Tech4ExamがGoogle Driveで共有している無料かつ新しいCDTダンプ：https://drive.google.com/open?id=1NfhVR0d3GaRBjeoUi6XMnil5bjYJ76ay
130 Nehru Main Road Post,
St Thomas Town,
Kammanahalli, Bengaluru
Karnataka - 560084
Call: 8970721253
For security purposes, please solve this simple puzzle to verify you are human before sending an OTP.